The Relationship Between Manufacturing Flexibility and Performance: A Meta Analytical Study
Ключевые слова:
Manufacturing Flexibility, Performance, Meta AnalysisАннотация
Today, manufacturing industries are trying to maintain and increase their competitiveness in an environment where constantly changing uncertainty prevails. The industry is increasingly searching for new technology to respond quickly and at low cost to fluctuating customer demands in the market. Manufacturing flexibility has become one of the prime areas of research in manufacturing technology. In the literature studies investigating the relationship between manufacturing flexibility and different aspect of performance are seen to yield differing results, and we are forced to consider that there might be other factors influencing this relationship. In this study an attempt was made to reveal the relationship between manufacturing flexibility and performance by means of a meta analysis of the combined results of separate studies carried out between 1990 and 2017 using an analytical technique.The resulting meta-analytical results are in line with the results of previous individual studies.
The meta analysis findings have revealed a positive relationship between Advanced Manufacturing Technologies (AMT), Engineering Technologies (ET) and types of Administration Technologies (AT) on one side and production and overall performance on the other. Evaluations of the findings obtained in the study are presented.
Библиографические ссылки
Abernethy, MA, & amp; Lillis, AM (1995). The impact of manufacturing flexibility on management control system design. Accounting, Organizations and Society, 20 (4), 241-258.*
Amoako-Gyampah, K., & Acquaah, M. (2008). Manufacturing strategy, competitive strategy and firm performance: An empirical study in a developing economy environment. International journal of production economics, 111 (2), 575-592.*
Anand, G., & Ward, P. T. (2004). Fit, flexibility and performance in manufacturing: coping with dynamic environments. Production and Operations Management, 13 (4), 369-385.*
Camisón, C., & Villar López, A. (2010). An examination of the relationship between manufacturing flexibility and firm performance: The mediating role of innovation. International Journal of Operations & Production Management, 30(8), 853-878.*
Diebold, 1952 Diebold, J., 1952. Automation: The Advent of the Automated Factory. Van Nostrand, New York
Doll, W.J., Vonderembse, M.A., 1991. The evolution of manufacturing systems: towards the post-industrial enterprise. Omega 19 (5), 401-411.
D'Souza, D. E. (2006). Performance payoffs from manufacturing flexibility: the impact of market-driven mobility. Journal of Managerial Issues, 494-511.*
Fawcett, S. E., Calantone, R. & Smith, S. R. (1996). An investigation of the impact of flexibility on global reach and firm performance. Journal of Business Logistics, 17 (2), 167.*
Frazelle, E. H. (1986). FLEXIBILITY-A STRATEGIC RESPONSE IN CHANGING TIMES. Industrial Engineering, 18(3), 17.
Germain, R., Droge, C., Christensen, W., 2001. The mediating role of operations knowledge in the relationship of context with performance. Journal of Operations Management 19, 4553-4569.
GLASS G. V.(1976), “Primary, Secondary, and Meta-Analysis of Research”, Educational Researcher, Vol. 5, no. 10 (Nov., 1976), pp. 3-8
Grubbström, R.W., Olhager, J., 1997. Productivity and Flexibility: Fundamental relations between two major properties and performance measures of the production system. International Journal of Production Economics 52, 73-82.
Gupta, Y. P., & Somers, T. M. (1996). Business strategy, manufacturing flexibility, and organizational performance relationships: a path analysis approach. Production and Operations Management, 5 (3), 204-233.*
Gupta, Y. P., & Somers, T. M. (1996). Business strategy, manufacturing flexibility, and organizational performance relationships: a path analysis approach. Production and Operations Management, 5 (3), 204-233.
Gupta, Y.P., Somers, T.M., 1992. The measurement of manufacturing flexibility. European Journal of Operational Research. 60 2 , 166–182.
Kekre, S. & Srinivasan, K. (1990). Broader product line: a necessity to achieve success? Management science, 36 (10), 1216-1232.
Koste, L. L., & Malhotra, M. K. (1999). A theoretical framework for analyzing the dimensions of manufacturing flexibility. Journal of Operations Management, 18, 75–93. http://dx.doi.org/10.1016/S0272-6963(99)00010-8
Lloréns, F. J., Molina, L. M., & Verdú, A. J. (2005). Flexibility of manufacturing systems, strategic change and performance. International Journal of Production Economics, 98 (3), 273-289.*
Maleki, R. A. (1991). Flexible manufacturing systems: The technology and management. Prentice Hall.
Narasimhan, R. & Das, A. (1999). An empirical investigation of the contribution of strategic sourcing to manufacturing flexibilities and performance. Decision Sciences, 30 (3), 683-718.*
Nash, M. M. (1983). Managing organizational performance. Jossey-Bass.
Noori, H. (1990). Managing the Dynamics of New Technology. Englewood Cliffs, NJ: Prentice-Hall
Ojha, D., White, RE, & Rogers, PP (2013). Managing demand variability using requisite variety for improved workflow and operational performance: the role of manufacturing flexibility. International Journal of Production Research, 51 (10), 2915-2934.*
Oke, A. (2013). Linking manufacturing flexibility to innovation performance in manufacturing plants. International Journal of Production Economics, 143 (2), 242-247.*
Oke, A., 2005. A framework for analyzing manufacturing flexibility. International Journal of Operations & Production Management 25 (10), 973-996.
Pagell, M. & Krause, DR (1999). A multiple-method study of environmental uncertainty and manufacturing flexibility. Journal of Operations Management, 17 (3), 307-325.
Parthasarthy, R., Sethi, SP, 1993. Relating strategy and structure to flexible automation: a test of fit and performance implications. Strategic Management Journal 14 7, 529-549. Perrow, C., 1967.
Patel, P. C., Terjesen, S. & Li, D. (2012). Enhancing effects of manufacturing flexibility through operational absorptive capacity and operational ambidexterity. Journal of Operations Management, 30 (3), 201-220.
SARAF, N.; LANGDON, CS and GOSAIN, S. (2007), "IS application capabilities and relational value in inter-firm partnerships", Information Systems Research, Vol. 18, No. 3, pp. 320-39.
Schroeder, R. G., Anderson, J. C. & Cleveland, G. (1986). The content of manufacturing strategy: an empirical study. Journal of operations management, 6 (3-4), 405-415.
Sethi, A.K., Sethi, S.P., 1990. Flexibility in manufacturing: a survey. The International Journal of Flexible Manufacturing Systems 2, 289-328.
Slack, N., 1988. Manufacturing systems flexibility - an assessment procedure. Computer Integrated Manufacturing Systems. 1 1, 25-31.
Sluti, D. G. (1992). Linking process quality with performance: an empirical study of New Zealand manufacturing plants (Doctoral dissertation, ResearchSpace@ Auckland).*
Suarez, F.F., Cusumano, M.A., Fine, C.H., 1995. An empirical study of flexibility in manufacturing. Sloan Management Review 37 1, 25-32.
Suarez, F.F., Cusumano, M.A., Fine, C.H., 1996. An empirical study of manufacturing flexibility in printed circuit board assembly. Operations Research 44, 1, 223-240.
Swamidass, P. M. (2000). Manufacturing flexibility. In Swamidass, P. M. (ed.) Encyclopedia of Production and Manufacturing Management (pp. 399-412). Boston: Kluwer.
Swamidass, P. M., & Newell, W. T. (1987). Manufacturing strategy, environmental uncertainty and performance: a path analytic model. Management science, 33 (4), 509-524.
Upton, D.M., 1994. The management of manufacturing flexibility. California Management Review 96 (2), 72-89.
VENKATRAMAN, N. and RAMANUJAN, V. (1986), “Measurement of business performance in strategy research: a comparison of approaches”, Academy of Management Review, Vol. 11, No. 4, pp. 801-15.
Vickery, S. K., Dröge, C., & Markland, R. E. (1997). Dimensions of manufacturing strength in the furniture industry. Journal of Operations Management, 15 (4), 317-330.
Vokurka, R. J. & O'Leary-Kelly, S. W. (2000). A review of empirical research on manufacturing flexibility. Journal of operations management, 18 (4), 485-501.
Wei, Z., Song, X. & Wang, D. (2017). Manufacturing flexibility, business model design, and firm performance. International Journal of Production Economics, 193, 87-97.*
Wood, C. H. (1991). Operations strategy: decision patterns and measurement (Doctoral dissertation, The Ohio State University).*
YAVUZ, Ç. (2010). “İşletmelerde İnovasyon-Performans İlişkisinin İncelenmesine Dönük Bir Çalışma”, Girişimcilik ve Kalkınma Dergisi, 5, (2), 143-173.
Zhang, Q., Vonderembse, M. A. & Lim, J. S. (2003). Manufacturing flexibility: defining and analyzing relationships among competence, capability, and customer satisfaction. Journal of Operations Management, 21 (2), 173-191.*
Загрузки
Опубликован
Как цитировать
Выпуск
Раздел
Лицензия
The Author(s) must make formal transfer of copyright for each article prior to publication in the International Journal of Contemporary Economics and Administrative Sciences. Such transfer enables the Journal to defend itself against plagiarism and other forms of copyright infringement. Your cooperation is appreciated. You agree that copyright of your article to be published in the International Journal of Contemporary Economics and Administrative Sciences is hereby transferred, throughout the World and for the full term and all extensions and renewals thereof, to International Journal of Contemporary Economics and Administrative Sciences.
The Author(s) reserve(s): (a) the trademark rights and patent rights, if any, and (b) the right to use all or part of the information contained in this article in future, non-commercial works of the Author's own, or, if the article is a "work-for-hire" and made within the scope of the Author's employment, the employer may use all or part of the information contained in this article for intra-company use, provided the usual acknowledgements are given regarding copyright notice and reference to the original publication.
The Author(s) warrant(s) that the article is Author's original work, and has not been published before. If excerpts from copyrighted works are included, the Author will obtain written permission from the copyright owners and shall credit the sources in the article. The author also warrants that the article contains no libelous or unlawful statements, and does not infringe on the rights of others. If the article was prepared jointly with other Author(s), the Author agrees to inform the co-Author(s) of the terms of the copyright transfer and to sign on their behalf; or in the case of a "work-for-hire" the employer or an authorized representative of the employer.
The journal is registered with the ISSN : 1925-4423.
IJCEAS is licensed under a Creative Commons Attribution 4.0 International License.
This license lets others distribute, remix, tweak, and build upon your work, even commercially, as long as they credit you for the original creation. This is the most accommodating of licenses offered. Recommended for maximum dissemination and use of licensed materials.
